PI4 4GB PICADE 10in - PICADE HAT drivers won't install correctly
@ixx wrote: I’ve just built a Picade 10” using a RP4 4GB and fanshim. I’m not installing the fanshim drivers as i know they will conflict with the hat. The picade is running after i used my own...
View ArticleClik here to view.
Looking for step by step instructions to set USB C Picade HAT to gamepad mode
@brooksoid wrote: Hi all, I’m looking for precise instructions to set up my USB C Picade HAT as a joypad, rather than a keyboard. I have a second-gen Picade (if that matters) with a Pi 3b+ in it....
View ArticlePI4 PICADE 10in, Fanshim + Arcadepunks PI4 image config guide
@ixx wrote: After a very frustrating Christmas, finally on Jan 1st I have my sons Picade 10" with a PI4 4GB up and running with 7749 games :) I started researching this back in November to avoid the...
View ArticleDrivers for older PiCade
@lvthunder wrote: I have the older PiCade and the SD card I was using died. So I have to start over. Are the instructions for installing the drivers the same as the newer one? Posts: 4 Participants: 2...
View Article(solved) Picade v2: no image & switch not working
@ElGregos wrote: Hi, I just assembled the Picade v2 with a Raspberry PI 4 & 32gb NOOBS sd card. It looks really cute and gorgeous, but the pb is the 10’ screen shows nothing. I tried powering the...
View ArticleClik here to view.
3D Printed Backlit Marquee
@brawfx wrote: I wanted to share a mod I did to my Picade. I 3D printed a marquee based on another makers design, and modified it to house NeoPixels and an Adafruit Metro Mini to animate the lights....
View ArticleHelp with getting to Emulationstation menu
@Scalz wrote: Hi all. Building my Picade with a Pi 3 model B. I am at the point where I am ready to configure emulationstation. I entered emulationstation on the command line and am now at the screen...
View ArticlePicade X USB-C Hat - Undervoltage with 5v 6A (30W) supply
@adambutler wrote: I’m building a table-top arcade machine at the moment. I’ve got a 5V 6A (30W) AC/DC converter that produces a steady 5.03 V going directly into the Picade X Hat pins (next to the...
View ArticlePicade PCB not responding correctly to buttons
@Caz wrote: Hi all ! I have a Picade Cab for about 3 years now, i come to ask for help or info about a growing problem with the Picade PCB. After i built the cabinet, everything was working alright...
View ArticleClik here to view.
Trouble powering down
@Tootai wrote: IMG_20200120_2308174608×2176 2.62 MB Hi, I seem to be getting these error messages most of the time when i’m turning off the Picade, either from software or by pushing the power button....
View ArticleButtons not work (but Joystick and speaker does?!) Help!
@gordon wrote: Here is my setup: Pi 3B Latest Picade 10in kit (suitable for Pi 4 with USB-C) CanaKit 2.5A power for Pi Separate CanaKit 2.5A power for 10in Screen Fresh install Retropi 4.5.1 I updated...
View ArticleSingle joystick direction not working - 10" Picade
@alice wrote: Hi all, I’ve built my first Picade (10" edition) and I am very excited to get it up and running. Only issue is that I cannot for the life of me get the joystick to be recognised in...
View ArticleSupply power to Pi and to XHAT separately
@Edu wrote: Hi, I’ve modded my Picade to have the XHAT away from the Pi, in order to fit an oversized heat sink. That’s leading to constant undervoltage warnings, apparently due to the flat cable...
View ArticlePicade Jumps off table - replacement panels?
@SithLord wrote: OK, so maybe it had help - but I still need to replace the left and top side panels viewed from the front. How can I get the spares? I haven’t turned it on, but no cracks in the...
View ArticlePicade Raspberry 4 Upgrade
@olli1705 wrote: Hi ! I have the 10 " Raspberry 3 Picade and I would like to upgrade it to Raspberry 4 to get some extra Power for N64 or Dreamcast emulation. Do I only have to exchange the Raspberry...
View ArticleCannot get 10 inch display to work
@pimoron wrote: brand new to this type of stuff, thought I would make a hobby learning how to build up some retro game consoles so figured id start with what I thought would be a simple introduction...
View ArticlePicade X HAT USB C as MIDI controller
@FondsofFall wrote: Hello, A little bit of shopping assistant needed, is it possible for Picade X HAT USB C board as MIDI controller instead of Picade videogame? There is an old version of Picade that...
View ArticleClik here to view.
Picade Display Issue
@Snoozey_K wrote: I’m getting the interference (?) on the Picade 10” screen but no such issues when connecting via the same HDMI cable to either my external monitor or TV. Any ideas?? image1512×2016...
View ArticleClik here to view.
Splashscreen
@yaneczech wrote: Greetings guys, just made a splashscreen for my Picade, so here it is if anyone interested :) picade_pie1920×1080 424 KB Posts: 2 Participants: 2 Read full topic
View ArticleAnimated Marquee for Picade
@Edu wrote: Is it possible to build something like this for the Picade? Dream setup would be to have the marquee change according to the game being played. Anything that works, though, would be...
View Article