@andywarburton wrote:
Hi folks,
I have one of the new Picades featuring the new picade-x hat. Everything is working as intended except for the audio. I’ve checked the connections to the hat and they seem to be ok (they don’t come out even with a firm tug).
This may not be relevant, but I previously used this card / pi with the new Hyperpixel.
I tried re-running the setup script and this is the output:
Checking hardware requirements... Checking for packages required for GPIO control... Checking for dependencies... alsa-utils is already installed lsb-release is already installed Github repo already present. Updating... Already up-to-date. Finalising Install... Picade HAT: Installer Installed: /boot/overlays/picade.dtbo Warning: /etc/udev/rules.d/10-picade.rules already exists, not replacing! Warning: /etc/asound.conf already exists, not replacing! Config: Uncommented "dtoverlay=picade" in /boot/config.txt Config: Uncommented "dtparam=audio=off" in /boot/config.txt Installation finished. You must reboot for changes to take effect!My /boot/config.txt now looks like this: https://pastebin.com/JVqK03WN
I think this is most likely a software issue caused by me previously using this card in a HyperpixelPi. Any suggestions for what could be going wrong? (dtparam=audio=off looks suspect to me but I have no idea what I’m doing with this file)
Posts: 1
Participants: 1